VELOSIT® WP 101

High Strength Cementitious Waterproofing Slurry

Product Description

VELOSIT WP 101 is a cementitious waterproofing slurry for concrete and masonry. VELOSIT WP 101 is a shrinkage compensated cementitious waterproofing slurry with very quick strength development. VELOSIT WP 101 gains strength a lot faster than the current standard products reducing or completely eliminating the need for days of water curing and protection. VELOSIT WP 101 creates a rigid abrasion resistant coating layer on the substrate. VELOSIT WP 101 is the result of many years in the field testing and research.

View Technical Data Sheet (TDS)

Safety Data Sheets (SDS)

Safety Data Sheet (SDS)

Typical Applications

Waterproofing:
- of basements and below grade
- of potable water structures
- of elevator pits
- against rising dampness in walls
- underneath tiles and natural stones
- of prefabricated garage roofs
Negative side underneath flexible waterproofing membranes
In compliance to AS/NZS 4020
Prime coat to fill blow holes, honeycombs and surface roughness

Features

Minimal shrinkage/expansion under dry resp. wet curing conditions
Hydrophobic
Open to foot traffic after 3 – 4 hours
Ready for water pressure after 24 hours
Very good adhesion to concrete and masonry
45 min. working time and 12 MPa compressive strength after 4 hours
Final strength of more than 50 MPa (7250 psi) after 28 days
Good weathering resistance
Resists 130 m water pressure acc. to EN 12390-8

Case Study

Hychem engineers long-term durability for the Adelaide Public Realm

Our team utilised an integrated suite of rapid-curing MMA/PMMA membranes and lightweight screeds, ensuring the structural integrity of one of South Australia’s most significant civic hubs long into the future.

Learn more

Expert structural solutions and support for your next project:

Contact