VELOSIT® RM 205

Structural Concrete Repair Mortar R4 6 – 100 mm

Product Description

VELOSIT RM 205 is a cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm.VELOSIT RM 205 is a shrinkage compensated cementitious repair mortar with quick strength development. VELOSIT RM 205 creates an extremely well bonded, rigid abrasion resistant layer on the substrate.

View Technical Data Sheet (TDS)

Safety Data Sheets (SDS)

Safety Data Sheet (SDS)

Typical Applications

Repair of large surface defects on concrete
Overlays and repairs on concrete structures like dams, bridges, beams, balconies, facade
Application on horizontal and vertical incl. overhead areas
Application thickness from 6 mm to 100 mm
Used as micro-concrete
Prime coat to fill blow holes, honeycombs and surface roughness

Features

Product approved by TMR-QLD- MRTS72 + MRTS73
Minimal shrinkage/expansion under dry resp. wet curing conditions minimizing the risk of micro-cracking
Approval Standards – AS4020:2005 Potable Water
Excellent workability
Wide range of water addition
Fiber reinforced
Hydrophobic
Final strength of more than 45 MPa after 28 days
Open to foot traffic after 3 – 4 hours
Excellent adhesion to properly prepared concrete
Water curing only under hot and dry conditions required for 3 – 4 hours
Good resistance against CO2 and Chloride penetration due to a very tight pore structure
Good weathering resistance
Good sulfate resistance

Case Study

Hychem extends asset life at Sunbury Recycled Water Plant

Hychem Infrastructure, in collaboration with Downer, delivered a comprehensive concrete remediation and protective lining solution for the Sunbury Recycled Water Plant upgrade.

Learn more

Expert structural solutions and support for your next project:

Contact