VELOSIT® NG 511
Non-Shrink Grout with High Performance For 6 - 50 mm
Product Description
VELOSIT NG 511 is a cementitious non-shrink grout for concrete substrates. It is used to fill large voids or underneath base plates of machinery or building columns up to 50 mm clearance. VELOSIT NG 511 creates an extremely well bonded, high strength connection between concrete and concrete or concrete and steel. VELOSIT NG 511 is a double shrinkage compensated cementitious grout with quick strength development.
Typical Applications
- Interior and exterior use
- Repair of large surface defects on concrete
- Filling of gaps between two concrete bodies
- Grouting of machinery and construction columns
- Application thickness from 6 mm to 50 mm
- Anchoring of starter bars and dowels
Features
- Product approved by TMR-QLD- MRTS72 + MRTS73
- Minimal shrinkage
- Slight volume increase in the plastic stage to ensure good bond to base plates
- Excellent workability
- Wide range of water addition allowing consistencies from plastic to fluid
- Fiber reinforced
- Advanced corrosion inhibitor technology
- 60 min. working time and 12 MPa (1740 psi) compressive strength after 6 hours
- Open to foot traffic after 6 hours
- Water curing only under hot and dry conditions required for max. 4 hours
Expert structural solutions and support for your next project:
Contact