VELOSIT® CP 201

Cementitious Corrosion Protection and Concrete Primer

Product Description

VELOSIT CP 201 is a cementitious corrosion protection and primer for concrete, masonry and steel. It is designed as bonding bridge for the VELOSIT RM repair mortars on critical substrates.

VELOSIT CP 201 is a shrinkage compensated cementitious slurry with very quick strength development.

VELOSIT CP 201 is the result of many years in the field testing and research. VELOSIT CP 201 can be applied by brush or suitable spray equipment.

View Technical Data Sheet (TDS)

Safety Data Sheets (SDS)

Safety Data Sheet (SDS)

Typical Applications

Interior and exterior use
Priming of concrete and masonry for VELOSIT RM mortars
Corrosion protection of concrete embedded steel like rebar
Prime coat to fill blow holes, honeycombs and surface roughness
Can be used for vibrated floor systems as a bonding bridge between tiles and mortar bed

Features

Minimal shrinkage/expansion under dry resp. wet curing conditions
45 min. working time and 12 MPa compressive strength after 4 hours
Final strength of more than 45 MPa after 28 days
Very good adhesion to concrete and masonry
Good sulfate resistance
Good resistance against aggressive media with a pH range of 3–12 and against soft water with low ion content
Potable water approved

Case Study

Hychem extends asset life at Sunbury Recycled Water Plant

Hychem Infrastructure, in collaboration with Downer, delivered a comprehensive concrete remediation and protective lining solution for the Sunbury Recycled Water Plant upgrade.

Learn more

Expert structural solutions and support for your next project:

Contact