Case Study
VELOSIT® WP 101
High Strength Cementitious Waterproofing Slurry
Product Description
VELOSIT WP 101 is a cementitious waterproofing slurry for concrete and masonry. VELOSIT WP 101 is a shrinkage compensated cementitious waterproofing slurry with very quick strength development. VELOSIT WP 101 gains strength a lot faster than the current standard products reducing or completely eliminating the need for days of water curing and protection. VELOSIT WP 101 creates a rigid abrasion resistant coating layer on the substrate. VELOSIT WP 101 is the result of many years in the field testing and research.
Typical Applications
- Waterproofing:
- of basements and below grade
- of potable water structures
- of elevator pits
- against rising dampness in walls
- underneath tiles and natural stones
- of prefabricated garage roofs
- Negative side underneath flexible waterproofing membranes
- In compliance to AS/NZS 4020
- Prime coat to fill blow holes, honeycombs and surface roughness
Features
- Minimal shrinkage/expansion under dry resp. wet curing conditions
- Hydrophobic
- Open to foot traffic after 3 – 4 hours
- Ready for water pressure after 24 hours
- Very good adhesion to concrete and masonry
- 45 min. working time and 12 MPa compressive strength after 4 hours
- Final strength of more than 50 MPa (7250 psi) after 28 days
- Good weathering resistance
- Resists 130 m water pressure acc. to EN 12390-8
Expert structural solutions and support for your next project:
Contact