POLYAC® 12

Rigid, Very Fast Curing, PMMA Based Primer for POLYAC® Systems

Product Description

POLYAC® 12 is a rigid, very fast curing, PMMA (Polymethyl methacrylate) based primer for the POLYAC® systems, to be applied on mineral surfaces.

View Technical Data Sheet (TDS)

Safety Data Sheets (SDS)

Safety Data Sheet (SDS)

Typical Applications

POLYAC® 12 is a rigid primer for the POLYAC® floor, membrane and other POLYAC® systems that are applied to mineral, absorbent surfaces such as sand/cement screeds, concrete, brick, tiles. The primer has excellent adhesion and can be applied at temperatures below freezing thanks to its rapid reaction and good reactivity. POLYAC® 12 can be used as concrete protection and the sanded-in variant can be used as a fast primer for epoxy and polyurethane floor systems.

Features

High reactivity
Fast curing
Applicable at low temperature
Optimal viscosity
Widely applicable
Can be applied horizontally and vertically
Optimised polymerisation under difficult conditions
To be applied with roller or brush.

Expert structural solutions and support for your next project:

Contact